Radiography Testing

Radiography Testing

Radiographic Testing (FT) is a non destructive examination (NDE) technique that involves the use of either x-rays or gamma rays to view the internal structure of a component. During Radiographic Testing, the test-part is placed between the radiation source and film (or detector). The material density and thickness differences of the test-part will attenuate (i.e. reduce) the penetrating radiation through interaction processes involving scattering and/or absorption. The differences in absorption are then recorded on film(s) or through an electronic means. In industrial radiography there are several imaging methods available, techniques to display the final image, i.e. Film Radiography, Real Time Radiography (RTR), Computed Tomography (CT), Digital Radiography (DR), and Computed Radiography (CR).

We Have Extensive Range Of Equipment Of Low and High Energy To Maintain Quality
Requirement of Our Esteemed Customer As Follows:-

  • X-RAY Machines For Thickness Range of 1MM TO 30 MM
  • Se 75 Sources For Thickness Range of 4 MM TO 30 MM
  • Ir 192 Sources For Thickness Range of 20 MM TO 70 MM
  • Co 60 Sources For Thickness Range of 60 MM TO 200 MM

Castings : Sand And Investment Casting Of Thickness 04 Mm To 200 Mm From All Industrial Sector Including Aerospace and DRDO.

Welding : Boiler Tubes, Pressure Vessel and Tanks


  • Aerospace industries
  • Military defence
  • Offshore industries
  • Marine industries
  • Power-gen industries
  • Petrochem industries